Skip to content
Nationwide delivery 0913 503 8422

Rode NT2A Condenser Microphone

₦696,500

The Rode NT2-A (RØDE NT2-A) is a professional multi-pattern 1-inch large-diaphragm studio condenser microphone engineered for ultimate recording versatility in vocal tracking, acoustic instrument recording, ensemble capture, and ambient room miking. Featuring Australian-designed and manufactured dual gold-sputtered 1-inch HF1 capsules, on-mic three-position controls for polar patterns, high-pass filters, and attenuation pads, an exceptionally quiet 7dBA self-noise floor, and high 147dB SPL capability (expandable to 157dB), the NT2-A delivers silky smooth high frequencies and full-bodied low-end response.

Highlights

  • Polar Pattern Selection
  • High-Pass Filter Control
  • Variable Attenuation Pad
  • Lead & Backing Studio Vocals

Key specs

Polar Pattern
Multi-pattern
01

Executive Overview

The Rode NT2-A (RØDE NT2-A) is a professional multi-pattern 1-inch large-diaphragm studio condenser microphone engineered for ultimate recording versatility in vocal tracking, acoustic instrument recording, ensemble capture, and ambient room miking. Featuring Australian-designed and manufactured dual gold-sputtered 1-inch HF1 capsules, on-mic three-position controls for polar patterns, high-pass filters, and attenuation pads, an exceptionally quiet 7dBA self-noise floor, and high 147dB SPL capability (expandable to 157dB), the NT2-A delivers silky smooth high frequencies and full-bodied low-end response.

02

Key specs

Polar Pattern
Multi-pattern
03

Technical Specifications

Brand & Model
RØDE Microphones NT2-A
Acoustic Principle
Pressure Gradient Condenser
Capsule Type
Dual 1.00" Gold-Sputtered HF1 Capsule
Active Electronics
JFET Impedance Converter with Bipolar Output Buffer
Directional Polar Patterns
3-Position Switchable: Cardioid, Omnidirectional, Figure-8
Frequency Range
20 Hz – 20,000 Hz
High-Pass Filter (HPF)
3-Position Switchable: Flat, 40 Hz, 80 Hz
Attenuation Pad
3-Position Switchable: 0 dB, -5 dB, -10 dB
Output Impedance
200 Ω
Maximum SPL
147 dB SPL (@ 1kHz, 1% THD into 1kΩ load) / 157 dB SPL with -10dB Pad
Maximum Output Level
+16.0 dBu (@ 1kHz, 1% THD into 1kΩ load)
Sensitivity
-36.0 dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) ± 2 dB @ 1kHz
Equivalent Noise Level
7 dBA SPL (A-weighted per IEC651)
Signal-to-Noise Ratio
> 87 dB SPL (A-weighted per IEC651)
Dynamic Range
140 dB SPL (A-weighted per IEC651)
Power Requirements
P48 (48V Phantom Power via 3-pin XLR)
Output Connector
Standard 3-Pin Balanced XLR
Construction & Finish
Heavy-Duty Satin Nickel-Plated Solid Steel Body
Dimensions & Weight
209 mm (H) x 55 mm (W) x 55 mm (D) / 860 g
04

Core Product Highlights

1. Dual 1-Inch Gold-Sputtered HF1 Capsule

Engineered and manufactured in Sydney, Australia, the dual 1" HF1 capsule features ultra-thin 5-micron gold-sputtered Mylar diaphragms. The transducer delivers silk-smooth high frequencies combined with a rich, controlled proximity effect for studio vocalists and acoustic instrument tracking.

2. On-Board 3-Position Tactical Switches

The body of the NT2-A incorporates three independent 3-position toggle switches providing unprecedented sound-shaping flexibility directly on the microphone:

Polar Pattern Selection

Switch seamlessly between Cardioid (focused front pickup), Omnidirectional (360° ambient capture), and Figure-8 (side-rejection Blumlein/M-S recording).

High-Pass Filter Control

Toggle between Flat, 40 Hz, or 80 Hz low-cut filters to attenuate HVAC rumble, floor vibrations, and unwanted low-frequency boominess.

Variable Attenuation Pad

Engage 0 dB, -5 dB, or -10 dB pads to prevent internal preamp overload when recording loud drum kits, brass sections, or cranked guitar cabinets.

3. Ultra-Low 7dBA Self-Noise & Ultra-Wide Dynamic Range

With a self-noise rating of just 7dBA, the NT2-A stands among the quietest studio microphones in its class, ensuring delicate acoustic performances and spoken-word voiceovers are captured without audible background hiss. An incredible 140dB dynamic range permits distortion-free capture from whisper quiet to high-energy source levels.

4. Roadworthy All-Steel Architecture

Constructed with a heavy-duty satin nickel-plated zinc/steel housing and a heat-treated welded steel mesh head, the NT2-A is built to endure decades of rigorous studio usage. An internal elastic capsule shock-mounting system minimizes handling noise and structural mechanical isolation requirements.

05

Target Applications

Lead & Backing Studio Vocals

Transparent, detailed voice capture with switchable proximity response.

Acoustic Instruments

Classical guitar, acoustic piano, strings, and woodwinds using cardioid or omni modes.

Stereo & Ambient Miking

Figure-8 and Omnidirectional patterns enable M-S stereo, Blumlein pairs, and room ambiance tracking.

Drums & Loud Amplifiers

High 157dB MAX SPL handling with pad engaged accommodates loud percussion and guitar cabs.

Customer reviews

No reviews yet — if you've bought this one, yours would be the first.

More in Pro Audio

See all →
Plantronics Encorepro HW710 Wired Mono Headset
Plantronics Encorepro HW710 Wired Mono Headset
₦97,000
Remax K22 2-in-1 Wireless Microphone
Remax K22 2-in-1 Wireless Microphone
₦27,900
Zealot W07 CHB Wireless Mic
Zealot W07 CHB Wireless Mic
₦24,400
Boya By-M1dm Lapel Microphone
Boya By-M1dm Lapel Microphone
₦36,800
Plantronics Blackwire C3220 USB-C Headset
Plantronics Blackwire C3220 USB-C Headset
₦69,200
Jabra HSC060 Wired Headphone Evolve 30
Jabra HSC060 Wired Headphone Evolve 30
₦97,800
Pro Desktop Live Mic + RGB MU900PRO
Pro Desktop Live Mic + RGB MU900PRO
₦39,800